Saturday, July 15, 2017

A Y and a Flower Pot

Y146 arrives at West Ballarat with a short grain train.

Finally a Y has arrived at West Ballarat Sidings. The Cattle Yards / Redan line was mainly run by Ballarat based Y class locomotives during the 1980's so its good to have Y146 running on the layout. 

Y146 is a second hand Austrains model I picked up from Train World while I was in Melbourne earlier this year. The previous owner had already installed a DCC decoder so it was ready to go. After running it a few times I noticed that the headlight had dropped down into the cab area. After taking off the body I found the plastic headlight assembly had broken and was pointing downward. A short search on the internet found this is a common problem with this model. Nothing that some glue and a short length of styrene rod couldn't fix. With the light now shining from the correct location Y146 is able to take its rightful place on West Ballarat Sidings.

Headlight aside, Y146 is a great little model. It runs like a dream and is perfect for West Ballarat. 

Y146 with a VPFX bulk flour wagon in tow. 

Another recent arrival on West Ballarat is VPFX 5, an SDS model of a Victorian railways pneumatic flour wagon. I haven't seen any photos of these wagons on the Cattle Yards / Redan line (I haven't seen too many photos of trains on this line full stop) but they did run to the flour mill at North Ballarat. I'll write up a review of this wagon shortly.

And that's about it.

Tuesday, July 4, 2017

My Layout Project - West Ballarat Sidings

V/line T368 holds the main at West Ballarat as it prepares to shunt the sidings.

Been a while between drinks on this blog but while I haven't been out getting photos of Kiwi Rails finest working hard around Otago I have been busy building a layout. Oh and I also fitted in a trip to Melbourne earlier in the year as well.

Photos from my Aussie trip will be on the blog soon but for this post I'll give a rundown on my layout West Ballarat Sidings.

West Ballarat Sidings is a small shunting layout loosely based on the short Cattle Yards / Redan line in Ballarat, a large town in the great Australian state of Victoria.The layout is set firmly in the V/line tangerine era of the mid 1980's.

My inspiration to build this layout came from a few sources. The first being Mark Baus Victorian Railways website http://www.victorianrailways.net/ . This website is basically the online bible for fans of Victorian Railways. Heaps of photos and track plans, a great resource for those modelling Victorian Railways and a site where I've lost a countless hours of my life. The second being flickr. Now if you're into railways I have no doubt like me you've searched flickr from top to bottom looking for your favourite trains and railways. There is a huge amount of photos of V/line trains running around Victoria during the 1980's which is great for research.
Another great site is the When there were Stations site ( http://www.stationspast.net/). This site has a huge number of photos of stations, yards and other rail infrastructure from around Australia and another great source of information for modellers of Australian railways. 

One site that really gave me a kick in the arse to build something was Ben Grays blog on building his 1970's NSW shunting layout ( http://nswrintheseventies.blogspot.co.nz/ ). Ben has done a great job documenting his layout and how he went about building it.

General overview of the layout so far.

So far I've got the bench work done and laid the track. The layout is 300 by 60 cm and is basically an inglenook with another two sidings added. Included is a petrol siding and another serving Ballarat Seed and Grain, although this customer could change. The bench work is standard grid type with foam board over the top. Track is PECO code 100 with insulfrog medium radius turnouts. Not the most realistic track but absolutely bomb proof!

First series T 322 with a short train on the main.

So far I've attached my controller to the rails with some small crocodile clips. Shortly I'll get started on the wiring but every time I get in the shed I end up running a few shunting services instead. 

 T 322 in front of the fuel siding.

As I get more things done on the layout I'll update the blog. 

This is the first 'proper' layout I've started and I'm having a blast. If you're considering building something, DO IT! The hardest part is starting.

And that's about it.